November 16, 2010

Job Vacancy: Good Corporate Governance at PT Elnusa Tbk


PT Elnusa Tbk, a national pride world class company for total solution in Upstream Oil and Gas Services (see: www.elnusa.co.id). We are currently seeking for highly qualified candidates to fill the following position:

GOOD CORPORATE GOVERNANCE (Code : JGCG)

REQUIREMENT:
  • Male or Female, min. 28 years old.
  • Min S1/S2 graduated, Background study Engineer from any reputable university (GPA min. 2.75 scale of 4).
  • Having min. 3 years experience in Good Corporate Governance (will be advantage in oil & Gas Industry).
  • Have excellence skill in writing paper
  • Have excellence knowledge about GCG program
  • Have a good networking and could speak infront of public as a trainer
  • Fluent in English both oral and written.
  • Have good computer skill (MS Office, Database, SAP).
  • Competencies: Integrity, Synergy, Commitment, Customer Service Orientation, conceptual & logical thinking, strategic thinking, interpersonal skill, adaptability, stress management, impact & influence, delegation & follow up, decision making.
If you meet the above requirements, please visit our website (www.elnusa.co.id) click career then apply online registration (Don’t apply more than one position, we will not process it).

Only short-listed candidates will be contacted for further selection process.


Job Vacancy: Senior QA/QC Inspector


CAREER OPPORTUNITIES

SENIOR QA/QC INSPECTOR

Requirement :
  • Experiences in Oil & Gas inspections/certification
  • National Indonesian or International
  • More than 12 years of experiences in inspections / certification / QAQC   (lifting equipment, pipe, casing, tubing, drill pipe, vessel pressure test, NDT, leak test, drilling material inspection)
  • Very good level in English
  • Short term contract : writing and implementation within the company of SOP (technical inspection procedures, HSE procedures, Quality procedures)
  • Duration : Between 2 and 4 months
  • First part of the work can be made by email (remoted location possible)
  • Second part : implementation, candidate should agree to come and spend some time at Surabaya
If you meet the above requirement, please send your CV to : info@siaptek.com


November 15, 2010

Job Vacancy: Senior Process Engineer at Fircroft


An Established Oil Company (PSC) in Indonesia is searching a qualified candidates for:

Senior Process Engineer
(+8 years of working experience)

Type: Facilities Engineering
  • Required: Bachelor Degree in Chemical Engineering
Basic Purposes and Responsibilities:
  • To ensure that the assigned Equipment and Process Control modification or projects works are executed in an expedient, cost effective, safe manner and in compliance with the Company Engineering Standards and International Codes.
Job Description:
  • Analyze engineering field evaluations and decide the reliable trouble shooting
  • Prepare technical design requirements including the compilation of scopes of work and specifications to evaluate optimum field development scenario for FEL development.
  • Interface with contractors, technical teams to integrate development plans with existing facilities for complex bid package.
  • Responsible for AFE package, Scope of work, Cost Estimate and JSA.
  • Necessary Interface with the Regulator, government agencies and other project stakeholders as required in facilitating design and permitting reviews
  • Perform Process Sizing calculations and prepare engineering document such as PFD s, P&ID s, etc.
  • To lead of Technical Bid Evaluation and recommend the bidder.
  • Contribute in-house technical design reviews and document distribution
  • Review the contractor s technical work scopes are executed in accordance with Contract specifications, contract technical requirements and Industry codes & standards.
  • Plan and promote all work to be implemented in a safe manner in support of the Project and Indonesian Business Unit s HSE objectives
  • Responsible for the review and assessment of the cost and schedule information
Required & Preferred Skills/Competencies

Process Software Application
Basic Level of Process Engineering work which included:
  • Basic Theory / Principle
  • Project Process Engineering / Design
  • Engineering Drawings and Documentation
  • Exploration and Production – General
  • Exploration and Production – Gas & Oil Handling / Processing.
  • Gas & Power.
  • General Facilities.
  • Heat Transfer & Rotating Equipment Utility System
Send your CV only (word format) to: indonesia@fircroft.com and quote the position you apply for.
   
Expiry Date: Nov 29, 2010


Job Vacancy: Supplier Quality Management - Lead at Fircroft


An Established Oil Company (PSC) in Indonesia is searching a qualified candidates for:

Supplier Quality Management - LEAD

Key Deliverables:

Strategy
  • Ability to articulate and communicate the strategic vision for PSCM & SQM and translate into actionable plans, deployed within the SPUs/ Sector Directorates SPU, Sector and Supplier Stakeholder Management
  • Routinely communicates openly and with integrity with key business stakeholders to align direction between PSCM and the internal customer intent
  • Coordinates SQM activities and implementation programs with SPU / Sector QM strategies and Segment QM strategies/ guidance
  • Interfaces with functional disciplines such as facilities, subsea, drilling and completions to ensure that operational and reliability requirements are delivered
  • Interfaces with related COMPANY S networks to ensure best practice SQM is transferred to SPU / sector PSCM activities in a cost effective and practical manner
Approved Vendor List & Supplier Pre-Qualification
  • Minimize the risk and maximize value by pre-qualifying the right suppliers and contractors for COMPANY S
  • Supplier Development plans to ensure identified gaps are addressed and closed in a timely manner
  • For each high level IM risk suppliers, develop and prepare an audit plan based on the results of the risk assessment process
  • Manage the completion of supplier assessments with targeted suppliers including working with suppliers to complete self assessments, and completion of on site reviews
  • Ensures appropriate contractor/ supplier verification and audit programs are established and prioritized in accordance with risk/ criticality assessment
Right First Time & Quality Planning
Lead the application of appropriate quality tools within the supply base to:
  • Support engineering to identify contractor/ supplier risk in accordance with criticality assessment
  • Identify supplier certification and verification documents that need to be in place
  • Ensuring contractor/ supplier Management of Change MoC processes are established and implemented
  • Integration of SQM processes into PSCM Sourcing and Supplier Management Processes
  • Establish Right First Time Performance Targets with key suppliers and contractors
Measurement and Monitoring of Supplier Quality:
  • Implements Supplier Performance Management processes by identifying leading and lagging metrics to be applied to specific contracts and purchase orders and ensuring that their output is measured and followed up as part of a continuous improvement process
Continuous Improvement
  • Drives a step change in performance by:
  • Reduce the cost of poor supplier quality
  • Facilitating specific improvement workshops at suppliers premises to identify process failures and corrective actions to prevent re-occurrence.
  • Introduces Lean, Six Sigma and/or equivalent concepts as part of the continuous improvement cycle
  • Supports COMPANY S continual improvement programs, recommending and introducing process improvements by leveraging an extended network of thought leadership avenues
SQM Process & Tools
  • Assist in the development of SQM Processes & Tools as required
  • Continually looks for improvements in SQM Processes to drive internal efficiency
Organization Capability & Capacity
  • Anticipates and identifies capability gaps in self and establishes plans to address
Qualification:
  • Mechanical/Materials Engineering Degree (or equivalent experience)
  • ISO Lead Auditor Qualified
  • Thorough understanding of Root Cause Analysis, Preventive action & Poke Yoke
  • Thorough understanding of "Cost of Poor Quality"
  • Six Sigma Black or Green Belt Qualification
  • Significant oil and gas experience (Up stream), multi industry experience
  • Experience in welding, coatings & corrosion
  • Experienced in health and safety management system assessment
  • Experienced in delivering training materials to colleagues/suppliers
Send your CV only (word format) to: indonesia@fircroft.com and quote the position you apply for.

Expiry Date: Nov 29, 2010


November 12, 2010

Job Vacancy; Senior Negotiation Analyst at Fircroft


An Established Oil Company (PSC) in Indonesia is searching a qualified candidates for:

Senior Negotiation Analyst

Role Synopsis:
  • The Senior Negotiation Analyst reports to the Asia Pacific Business Development Manager and is responsible for identifying, negotiating and capturing options that support the delivery of COMPANY’S Asia Pacific strategy.
  • This includes creating, drafting, and negotiating various agreements/contracts (operating, conveyance, acquisition/divestment, access/leases, trades and co-venture, options, confidentiality, etc.).
  • The Senior Negotiation Analyst will be exposed to critical relationships with industry partners and government agencies (e.g MIGAS and BPMIGAS), as well as many internal customer groups and must maintain a high degree of integrity as COMPANY S representatives in the discharge of these responsibilities.
Key Accountabilities:
  • Partner and COMPANY S stakeholder communication.
  • Deal development with preparation and negotiation of associated agreements.
  • Internal and external stakeholder communications.
  • Regulatory assurance, compliance, advocacy.
Essential Criteria & Qualifications:
  • University degree in Economics, Finance or Law.
  • Minimum of 10 years experience in a similar/related role.
  • Minimum of 10 years experience working in cross discipline teams.
  • Exploration and Production (E&P) operations knowledge.
  • Minimum 5 years of experience with E&P deal structure, drafting contracts and managing regulatory relationships.
  • Experience with E&P deal structure, drafting contracts and managing regulatory relationships.
  • Excellent written and oral communications.
  • Fluent in English.
Desirable Criteria & Qualifications
  • Broad based industry experience.
  • Ability to travel up to 25% to fulfill job requirements.
  • Ability and desire to work in team setting, and with limited supervision.
Send your CV only (word format) to: indonesia@fircroft.com and quote the position you apply for.

Expiry Date: Nov 26, 2010


Job vacancy: Process Engineer at PT OCSC Global


URGENTLY REQUIRED
A leading provider of products and services to the petroleum and energy industries require

Process Engineer
(Jakarta Raya)

Responsibilities:
  • Liaise with engineers to establish engineering’s drawings
  • Plan and schedule with service vendors in Turnkey to meet customers required delivery
  • Answer to field location enquiries and provide cost quote
  • Stocking plan of material with local stockist to support demand
  • Perform sub-contract purchases
Requirements:
  • Diploma/Degree in Mechanical Engineering
  • 2-3 years experience working in a manufacturing environment
  • Able to read engineering drawing and understand manufacturing processes
  • Energetic and able to work with various department and sub-contractors
Please submit your resume to
philip@newbridgerecruitment.com

Expiry Date: Dec 03, 2010


November 11, 2010

Job Vacancy: Project Manager


We are a National Construction company in oil and gas projects which established since 1992 with supported by more than 3000 employees, professional experts and able resources.Our existence and achievement over the past 20 years has enriched us with the experience, knowledge, and the capability to overcome any challenge, obstacles and barriers in many EPC projects.

We are urgently looking for highly qualified, talented, dynamic, productive and independent personnel to fill in the challenging position as PROJECT MANAGER in onshore project.

PROJECT MANAGER

The main responsibilities of this position are:
  1. To arrange work strategy with good planning, organize, supervise and evaluate job performance
  2. Have capability in the management of planning, controlling, coordinating, scheduling, monitoring quality and cost control of Projects and to assure that project objectives are achieved.
  3. Responsible in project handling with good planning, monitor project activity and evaluate all project performance
  4. Prepare project improvement report monthly
  5. Responsible in HES implementation program
  6. Responsible in all project performance
Requirements:
  1. University degree, has experience in production facility maintenance of MIGAS at least 5 years and as Project Manager at least 3 years
  2. English fluent written and orally
  3. Able to communicate with people of all levels and able to take pressure
  4. Display integrity and an open attitude
  5. Computer literate and good command of applicable business system
  6. Demonstrated strong ability to manage multiple projects simultaneously
  7. Experience in handling projects above USD$ 20M and demonstrated abilities in managing the execution of projects
  8. Having experience dealing with local contractors and local community (NGO).
  9. Certified Project Management is advanced.
  10. Willing to be located at Duri-Pakanbaru
If you are confident that you meet our requirements, please submit your application up to November 30th 2010, with complete curriculum vitae, expected salary, indicating the job position to:

recruitment_luqman@yahoo.com

- ONLY SHORT LISTED CANDIDATES WILL BE NOTIFIED -


Job Vacancy at WORK Group Limited; Various Positions


Oil & Gas Opportunities - Offshore
(Western Australia, Jakarta Raya, Kuala Lumpur, Singapore, Bangkok, China, Vietnam)

Requirements:
  • Velosi Energy Consultants, a global engineering consultancy is currently recruiting experienced design engineers from all disciplines for various onshore/offshore oil and gas projects to be based in SE Asia and Australia.
The positions available are:-
  1. Lead/Senior Offshore Structural Engineer
  2. Lead/Senior Process Engineer
  3. Lead/Senior Mechanical Rotating Engineer
  4. Lead/Senior Mechanical Package/Static Engineer
  5. Lead/Senior Piping Engineer
  6. Lead/Senior Pipeline Engineer
  7. Lead/Senior Maritime/Coastal Engineer
  8. Lead/Senior Offshore Geotechnical Engineers
  9. Lead/Senior Instrument Engineers
  10. Lead/Senior Cost/Planning Engineers
  11. Project Procurement Manager & Coordinator
  12. Senior Buyer/Buyer
  13. Lead Expeditor/Expeditor
Interested candidates are requested to submit their resumes with detailed working experiences and projects involved to m-brookes@velosi.com

Selected Candidates can expect a promising future with us, as they will be involved in a challenging yet dynamic working environment for the oil and gas industry.


November 10, 2010

Job Vacancy: Engineering Manager at Career Move Sdn Bhd (Search / Recruitment Firm)


The right job will make a huge difference to your career ... employees are the most important investment for success!

Career Move is an Executive Search and Selection Company dedicated to your executive Career Needs and Achieving your Career Goals. Our philosophy is to provide integrity, dignity and respect to our clients and our candidates.

Our client, a Canadian-charted company listed on the TSX Exchange, headquartered in Montreal, Quebec, Canada designs, develops, manufactures and commercialises a wide range of process equipment to separate oil, gas and water for the O&G upstream industry. Their Asia Pacific office offers a wide range of conventional and proprietary oil and water processing treatment solutions and is specialized in the supply of TEG (Gas Dehydration) packages, separators, fuel gas, nitrogen packages, produced water treatment and water injection packages.

As part of their business expansion plan, the company is seeking suitable candidate with enthusiasm and dynamic personality to join their winning team.

Engineering Manager
MYR 10000 - 18000
(Kuala Lumpur)

Responsibilities:
  • Responsible for the management of all engineering aspects of the project and execution plan.
  • Ensure all designs are in compliance with contract requirements and comply with Process Design requirements.   All technical aspects (mechanical related issues including piping, vessels, structure, heat exchangers and pumps) of the Project are connected, and technical interfaces are managed effectively to meet the Project Goals.
  • Support the Projects Department by ensuring timely completion of engineering deliverables.
  • Support the Sales Department with basic designs when required.
  • Complete mechanical design work when required.
  • Manage a small team of engineers including; E&I, Drafting, Mechanical
  • Manage subcontracted engineering including structural
  • Ensure General Arrangement drawings and designs are functional.
  • Ensure vendors engineering and drawings are in compliance with the project requirements.
  • Ensure a high quality of engineering is maintained
  • Ensure sufficient resources are in place to complete the engineering works
  • Implement and promote the Quality Management System throughout the department.
  • Liaise closely with the Projects department and Sales/Process Department.
  • Ensure all designs are optimized to maximize company profit. 
Requirements:
  • Candidate must possess at least a Bachelor's Degree in Engineering (Civil / Petroleum / Oil / Gas / Construction Management / Structural / Mechanical or related discipline.
  • At least 10 years experience in oil and gas industry with process equipment packages in an engineering capacity. Strong technical skills with good understanding of codes and standards. Those with Electrical and Instrumentations (E&I) exposure will be an added advantage.
  • Must be able to work independently although part of a team environment.
  • A Hands on person and able to complete engineering documentation including datasheet and checking of all engineering documents from vendors and company.
  • Diligent, positive attitude to challenging work, have good leadership, problem solving and analytical skills
  • Be flexible and able to work under pressure during challenging periods to meet project deadlines.
  • Familiar with Engineering Specifications and Engineering Program such as PV Elite.
  • Excellent communication skills (written English and Bahasa Malaysia).
  • This position reports to the General Manager (an expatriate).
Interested applicants please apply online or email a detailed resume with a recent PHOTOGRAPH (compulsory), stating CLEARLY your current and expected salary and contact numbers and email address to :
Angel A. Ng, CEO, Asia

Mobile :  +60-12-689 3193  (Malaysia)    +65-84 3737 87  (Singapore)

md.careermove@gmail.com

The compensation packages for this position is very competitive, with attractive salary and benefits, and meet international standards.
 
Only applicants selected for interviews will be contacted.


Job Vacancy: Supervisors at FRP Products Co. Pte Ltd


Established Corrosion Protection Engineering Company, carrying out maintenance projects in the Oil/Gas & Petrochemical Industry urgently requires:

SUPERVISORS
(Singapore)

Requirements:
  • Able to work independently
  • Must be computer literate with knowledge in Microsoft Project/Excel/Words
  • Able to read and write English & Chinese to liaise with Chinese speaking associates
  • Possess class 3 driving license preferably
  • Min 'O' level or ITE graduates with relevant working experience may apply
  • Applicants should be Singapore Citizen or SPR
Interested parties please send/fax/email detailed resume, current & expected salaries together with a non-returnable photo to:

HR Department
No. 8 Tuas Avenue 14, Singapore 638954
Fax: 6861-2766
Email: cathyteo@frp-products.com
Only shortlisted candidates will be notified


November 9, 2010

Job Vacancy: Verification Engineer(Oil & Gas) at Fircroft Limited (Search / Recruitment Firm)


Based in Ho Chi Minh City, Vietnam, working for an established international 3rd party certification services company and assigned to the company's Oil & Gas business unit.

Verification Engineer(Oil & Gas)
(Vietnam)

Responsibilities:
Main function:
  • Conducting verification work involving the fabrication of onshore/offshore structures/facilities on behalf of company and in support of clients' oil and gas development and production projects. Involved in development of risk based inspection and asset integrity management processes.
Requirements:
Job Requirements:
  • Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma/Bachelor's Degree in an Engineering discipline.
  • Min. 10 years experience in verification or equivalent discipline involving onshore/offshore oil and gas projects.
  • Experienced with Risk based inspection, Asset Integrity Management, Safety critical elements verification, written scheme of verification and other skills required to perform verification work in onshore/offshore oil & gas projects.
  • Experience with projects involving the fabrication of offshore structures like production platforms, wellhead platforms and FPSO would be an advantage.
  • Prior experience with 3rd party certification/verification companies would be advantageous.
  • Experience within South East Asia would be a plus
Apply Here

Expiry Date: Dec 08, 2010


November 8, 2010

Job Vacancy: Mechanical Engineer In Oil & Gas And Petrochemical at PT Rizquna Energy Persada


Mechanical Engineer In Oil & Gas And Petrochemical

QUALIFICATION:
  • Education : S2 in Mechanical Engineering.
  • Experience : Min. 3 years in Eng. Work of Oil & Gas, and Petrochemical Project.
  • Age : Max. 35 years old.
  • Familiar with International Codes and Standards related to oil & gas exploration & production Equipments.
  • Able to operate 2D CAD.
  • Able to prepare project specs, requisition.
  • Having knowledge and experience in reviewing ITB, prepare data sheet, specification, requisitioning, technical clarification/evaluations.
  • Experience in leading a work group or task force.
  • Posses integrity and good interpersonal skill, aggressive, confidence, and smart.
  • Target Achievers and familiar with working under pressure environment.
  • Work hard, think smart and out of the box.
  • Excellent English both oral and written.
Responsible to fulfill the following project requirements by exercising expertise and coordinating with the various parties involved in the project:
  • Engineering quality.
  • Vendor equipment design and manufacturing qualities.
  • Overall project cost and schedule.
If you meet the requirements, please send your application, curriculum vitae and recent passport photograph not later than 2 (two) weeks to: rini@rizqunaenergy.co.id

Expiry date: November 22, 2010


November 5, 2010

Job Vacancy: Mud Engineer at COSL Indo, PT


We need new employee
PT. COSL INDO is an overseas subsidiary company of COSL, it has provided a complete package of oilfield services, including drilling rig, well completion, workover, logging, cementing, filtration unit for clients from 2002.

COSL, has over forty years of experiences in the offshore oilfield services industry and is primarily engaged in delivering overall technical services for offshore oil & gas exploration and production. COSL possesses a complete service line, including marine geophysical survey, drilling & completion services, workover, logging, data acquisition and interpretation, R&D, marine supply & transportation. COSL can provide our clients with not only single service lines but also integrated or package services.

COSL, as an internationalized services company, has maintain good business relationships with over sixty different oil companies and specialized technology companies in over twenty countries, including USA, UK, France, Italy, Japan, etc. Our fleet has operated overseas for many years and currently we have several rigs, vessels, and geophysical vessels working internationally. Through outstanding performance and quality services, the company has successfully built it up its image as a reliable oilfield services provider.
In 2003, COSL was awarded the prestigious title of one of the Ten Best Small Companies and Ten Most Accessible Management in Asia by Euro Money, in the same year we received the award of being nominated as one of the Ten Best Managed Companies by Finance Asia.

COSL achieved nearly ¥0.7 billion net profit in 2004, and was recommended by Standard & Poor as one of thirty stocks with most investment value. The company was also awarded the distinction of being an advanced Unit in Enterprise Culture Successively in 2003 and 2004.

Please entry our company website: www.cosl.com.cn for more details on COSL.

Mud Engineer

Job descriptions:
  • Maintenance of drilling fluid properties via chemical and physical treatment as dictated by the operator/mud program.
  • Supervise all mud treatment and ensure proper use and maintenance of solids control equipment.
  • Ensure that an adequate rig site chemical inventory and an accurate record of supply and consumption is maintained.
  • Ensure provision of a complete, accurate and informative Daily Drilling Fluid Report.
  • Ensure provision of a complete, accurate and informative well summary.
  • Ensure proper inventory of offshore testing equipment and chemicals is maintained.
  • Ensure all drilling fluid test equipment is well maintained and regularly calibrated.
Qualifications:
  • University Graduate, major in oil and gas relevant engineering
  • Minimum 10 years mud experience in Oilfield Company (both onshore/ offshore preferred)
  • Male, age max 45 years old
  • Good command in English both spoken and written
  • Good Teamwork spirit
  • Must be computer literate – MS Office
Application sent to email: lei_ke@cosl.co.id


Job Vacancy: Chief Accountant at Talisman Energy Inc


Talisman Energy Inc. is a large, independent upstream oil and gas company headquartered in Calgary, Alberta, Canada. Talisman has operations in Canada and its subsidiaries operate in the North Sea, Southeast Asia, Australia, North Africa, the United States and Trinidad and Tobago.

Talisman entered Indonesia in 1994 through the acquisition of Bow Valley Energy Inc, giving us interests in the Corridor Block and Ogan Komering JOB in South Sumatera, among other assets.
Through the 2005 acquisition of Paladin Resource, Talisman acquired interests in the offshore South East Sumatera Block, Offshore North West Java Block and Jambi Merang JOB in 2010.

Talisman was awarded the high potential deepwater Pasangkayu Block (in partnership with Marathon Oil as operator) in 2006, continued with the high potential deepwater Sageri Block in 2007 and Andaman III in 2009. Most recently, South Sageri, Sadang and South Mandar were the new awarded blocks in 2010.

From existing producing assets alone, Talisman is expected to achieve rapid growth in Indonesia in the next few years (from almost 50,000 boe per day in 2007 to over 80,000 boe perday in 2010).

Experienced and suitably qualified Indonesian Nationals seeking challenging employment are invited to apply for this position

Position Title : Chief Accountant
Location : JOB Pertamina – Talisman (Ogan Komering) Ltd.
Jakarta – Indonesia
Reports to : Finance Manager

Reporting to the Finance Manager, JOB Pertamina – Talisman (Ogan Komering) Ltd., you will be responsible for:
  • Supervising key daily financial functions including Revenue and entitlement calculation, accounts payable and cash management, account receivable, insurance, joint venture accounting, cost accounting, taxes and budgetary controls.
  • Supervising accounting processes including the preparation of the monthly financial package ensuring compliance with Joint Operating Agreement, PSC accounting standards, and head office accounting policies, BPMIGAS reporting and budget/reforecast preparation.
  • Ensuring adequate control over variance actual vs budget and provide comprehensive analysis and explanation of the variances.
  • Closely monitoring the issuance of the new AFE and closed out the existing AFE for the job has been completed.
  • Monitor and evaluate forecasting and work to improve the reforecast/budget process.
  • Developing and monitoring sound financial and internal control procedures to safeguard assets and records of the company.
  • Developing accounting processes and procedures to comply with BPMIGAS requirements, Joint Operating Agreement requirements, head office policies and to ensure efficient financial reporting.
  • Overseeing the financial accounting system software with a view to identifying areas for continuous improvement and automation.
  • Participating on the tender committee and commercial issue related to oil and gas sales.
  • Coordinate the audit process and liaise with internal, external, partner and government auditors.
  • Developing good working relationships with professionals such as bankers, auditors or statutory organizations (BP MIGAS, MIGAS, Tax office).
  • Updating the firm regarding changes in legislation or regulations that may affect the business operation.
  • Preparing materials for OPCOM, BP MIGAS, and other internal presentations as required.
  • Deputize for the Finance Manager in her absence.
The ideal candidate will have:
  • A Bachelor s degree in Accounting or Business Administration or an internationally recognised professional accounting qualification.
  • Minimum ten (10) years extensive international oil and gas accounting and administrative experience covering exploration, development and production operations.
  • Strong Indonesian PSC knowledge including but not limited to PSC accounting and Revenue Entitlement calculation and BP MIGAS regulation/requirement.
  • Proven leadership, decision making and organizational skills.
  • Strong communication and interpersonal skills.
  • Strong analytical thinking and problem solver.
  • Attention to detail.
  • Excellent computer skill especially an advance skill in Microsoft Excel application (macro, pivot, vlookup, etc).
  • Ability to mentor and train staff.
Only the very best will be considered for this key position. Address your application quoting position title that you apply to :
careers-indonesia@talisman-energy.com

Expiry date: November 19, 2010


November 4, 2010

Job vacancy at Total E&P Indonesie


TOTAL E&P INDONESIE is a 100% Indonesian Subsidiary of the Parisbased TOTAL
Group, having its Head Office in Jakartaand operational sites in East
Kalimantan. Due to the high-level development activities to meet the increasing
hydrocarbon production commitment, TOTAL E&P INDONESIE invites highly qualified
professionals to apply for the following positions:
  • SENIOR INSPECTION ENGINEER
  • WELL PERFORMANCE ENGINEER
  • PLANNING ENGINEER
  • PROCESS & SAFETY DESIGN ENGINEER
  • HEAD DEPT. SURVEY
Interested applicants could see detailed qualification and apply to :
www.careers.total.com (select country: Indonesia) or
to ep-id-drh.recruitment@total.com(indicating the position applied in the email
subject)

General Requirement: willing to be relocated to Balikpapan (Balikpapan base)

Note: every e-mail regarding above positions sent to this email (yahoo) will not
be processed or replied


Job Vacancy: Engineer (Process/Civil & Structural/Mechanical & Piping/Instrument/ Electrical) at RNZ Integrated (M) Sdn Bhd


RNZ INTEGRATED (M) SDN BHD has been in operations for more than a decade. We provide fully integrated multidiscipline engineering design, procurement, construction, and commissioning services to domestic and regional oil & gas, and process industries.

We have grown our business at a steady pace which stems from continued improvement of our market share in the diversified sectors we serve. Working hand in hand with our clients rather than as adversaries, our relationship model supports their continued growth, improved profitability, and market advantage in this competitive oil & gas, and process industries. This in turn reinforces the value of our business model and ensures our continued growth and success. For us, consistent earnings growth, manageable risk, lower sales costs, and a more predictable revenue stream have resulted. We consistently identify, address, and satisfy our clients' business and project needs. To do this effectively, we provide our workforce with latest tools.

In line with our expansion we, an established Oil & Gas and Petrochemical Consulting Company, are looking for resourceful, dynamic and effective individual with high work ethics, good communication and analytical skill to fill up the following vacancy in our organization:

Engineer (Process/Civil & Structural/Mechanical & Piping/Instrument/ Electrical)
(Kuala Lumpur)

Requirements:
  • Possess a recognized Degree in a relevant field of Engineering
  • Min 8 years of design experience in Oil and Gas or Petrochemical industries in relevant disciplines.
  • Well versed with various software engineering tools such as HYSIS , PIPESIM, FLARENET, PRO II(Process), SACS, SESAM (Civil & Structural) AUTOPIPE (Mechanical & Piping), EDSA (Electrical, Instruments).
  • Familiar with PTS, DEP, SES, API, BS, NFPA, ASME, ANSI, ASTM,IEC, NEC, AISC, NACE etc.
  • Team players with good communication & strong analytical skills and knowledge of the use of analytical tools
Interested candidates are invited to apply online or to write/fax/e-mail in with your detailed resume and recent passport photograph to:

Human Resource Manager
RNZ INTEGRATED (M) SDN BHD
Level 17,
Menara Great Eastern,
303 Jalan Ampang,
50450 Kuala Lumpur.

Tel : 03 – 4264 2600
Fax : 03 – 4253 3585
Email : recruitment@rnzgroup.com

Only shortlisted candidates will be notified.

Expiry Date: Dec 04, 2010


Job Vacancy: Draughtsman / Draftsman / Draftsperson at RNZ Integrated (M) Sdn Bhd


RNZ INTEGRATED (M) SDN BHD has been in operations for more than a decade. We provide fully integrated multidiscipline engineering design, procurement, construction, and commissioning services to domestic and regional oil & gas, and process industries.

We have grown our business at a steady pace which stems from continued improvement of our market share in the diversified sectors we serve. Working hand in hand with our clients rather than as adversaries, our relationship model supports their continued growth, improved profitability, and market advantage in this competitive oil & gas, and process industries. This in turn reinforces the value of our business model and ensures our continued growth and success. For us, consistent earnings growth, manageable risk, lower sales costs, and a more predictable revenue stream have resulted. We consistently identify, address, and satisfy our clients' business and project needs. To do this effectively, we provide our workforce with latest tools.

In line with our expansion we, an established Oil & Gas and Petrochemical Consulting Company, are looking for resourceful, dynamic and effective individual with high work ethics, good communication and analytical skill to fill up the following vacancy in our organization:

Draughtsman / Draftsman / Draftsperson
(Kuala Lumpur)

Requirements:
  • Minimum 10 years design experience as a Designer / Drafter in Oil & Gas Industries in relevant disciplines.
  • Diploma in Mechanical Engineering or certificate in Engineering.
  • Good exposure and experience in preparation of various design deliverables such as Topside and Jacket Structural Drawings, Piping Plan, Isometrics, Equipment Layout, Instrument Layout, Hook-Up/Installation Single Line Diagram, Cable/Tray/Ladder Routing and etc.
  • Familiar with design codes and standards, latest design and engineering software such as AUTOCAD, BOCAD, PDS, PDMS and other engineering software is an added advantage.
  • Able to communicate well in English at all levels and disciplines.
  • Able to work with less supervision.
  • Good team player as well as a productive individual under tight schedule constraints
Interested candidates are invited to apply online or to write/fax/e-mail in with your detailed resume and recent passport photograph to:

Human Resource Manager
RNZ INTEGRATED (M) SDN BHD
Level 17,
Menara Great Eastern,
303 Jalan Ampang,
50450 Kuala Lumpur.

Tel : 03 – 4264 2600
Fax : 03 – 4253 3585
Email : recruitment@rnzgroup.com

Only shortlisted candidates will be notified.

Expiry Date: Dec 04, 2010


November 3, 2010

Job Vacancy: Process Engineer at PT OCSC Global


URGENTLY REQUIRED
A leading provider of products and services to the petroleum and energy industries require

Process Engineer
(Jakarta Raya)

Responsibilities:
  • Liaise with engineers to establish engineering’s drawings
  • Plan and schedule with service vendors in Turnkey to meet customers required delivery
  • Answer to field location enquiries and provide cost quote
  • Stocking plan of material with local stockist to support demand
  • Perform sub-contract purchases
Requirements:
  • Diploma/Degree in Mechanical Engineering
  • 2-3 years experience working in a manufacturing environment
  • Able to read engineering drawing and understand manufacturing processes
  • Energetic and able to work with various department and sub-contractors
Please submit your resume to: philip@newbridgerecruitment.com

Closing Date: Dec 03, 2010


Job Vacancy: Project Director / Sr. Projects Manager


Opportunity to work In Middle East
We are Indonesian Manpower Supplier Company and we have more than 20 years experience in recruitment and placement Indonesian manpower to work in many company in overseas at various job position. We are continuously searching for talented candidates to sustain our rapid growth, and to fullfil enqueries from our client especially in Middle East. If you are a person who enjoys challenges, high motivation, energetic and dynamic, we invite you to explore these opportunities to work in one of the well established company in Kingdom of Saudi for the following positions:

Project Director / Sr. Projects Manager
(Jakarta Raya)

Responsibilities:
  • To assist the head of the business on all ONSHORE OIL AND GAS TANKS AND TERMINALS and INDUSTRIAL projects in terms of technical, commercial and project management aspects
  • Monitoring the cashflows, project finance and budgets, subcontractor payments, related matters and ensuring that the operational P& L for the business unit is healthy and keep the BU head and the management informed of any deviations from the original planned budgets
  • Work closely with the Topaz Engineering Management Team and ensure overall organizational goals are met
  • Coordinate bid support as/when required
  • Develop lump sum / EPC capabilities within organisation
  • Coordination of all Project Execution Plans (PEPs)
  • Functional management and coordination of all Project Managers and Project Engineers
  • Ensuring all projects have in place a rigourous Control of change to PEPs processes (Variations, growth, scope changes, acceleration/deceleration of plans, etc.)
  • Implementation of the Project Risk Ranking tool
  • Determine, plan and provide Project Management resources to all scopes of work
  • Ensuring competency and training requirements are met for all Project Managers and Project Engineers
  • Outlining activities, resources and budget requirements for the annual Topaz Engineering Business Plan
Requirements:
  • Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Chemical), Engineering (Civil), Engineering (Mechanical), Engineering (Petroleum/Oil/Gas) or equivalent. An academic background comprised of a degree from a recognized institution in Project Management
  • Minimum Experience: 15 years experience in Project Management related activities of OIL&GAS ONSHORE ( TANKS AND TERMINALS ) AND OFFSHORE FABRICATION &ERCETION (jackets & platforms)/ CONSTRUCTION PROJECTS.
  • Applicants must be willing to work in Fujairah, UAE ( 180 Kms north of Dubai)
  • Preferably Senior Managers specializing in Engineering-Oil/Gas, Engineering-Civil/Construction/Structural or equivalent
Job-Specific Skills:
  • Experience in handling end to end project management functions of large Upstream and Downstream EPC projects from bid stage to execution and handover stage
  • Experience in managing project finance , budgets, cashflows and overall P&L of multiple large EPC upstream projects
  • Familiar with International Standards for design, engineering, construction and operations of Multidiscipline projects e.g. API, ASTM, BS, DIN, Shell DEP’s etc
  • Conversant with Project Planning, Project design, Costing, MIS reporting and system software's such as MS Project
  • Experience in construction site, man-power and equipment deployment requirement and fabrication of piping, structure, vessels etc., NDT and quality control system & heavy lifts.
  • Experience in managing a team of different technical skill sets assigned to various projects and sites in different geographies
Generic Skills:Proven Project Management experience in large fabrication and upstream & downstream EPC projects

Please submit your application including your latest CV, photo, and contact number to:
info@fahadmanpower.com and fahadfajar@gmail.com

Closing Date: Nov 26, 2010


November 2, 2010

Job Vacancy: Senior Field Service Engineer at Eaton Industries Pte Ltd


At Eaton, our businesses make a difference to the world. And you can make a difference at Eaton.

Eaton is a global, Fortune 500 diversified power management company. And we have been doing business for nearly 100 years. Eaton helps customers manage power, so buildings, airplanes, trucks, cars, machinery and entire businesses can do more while consuming less energy. As an integrated global company, we are unified in our commitment to powering business worldwide.

Eaton products and solutions are critical to industries and businesses. Our technology delivers the power inside hundreds of products and places – from aircrafts and military jets, manufacturing plants and hospitals, airport terminals, data centers and homes to hybrid trucks, cars, theme parks and oil rigs, and even the Panama Canal. We serve customers in more than 150 countries and do business in five industries: electrical, hydraulics, aerospace, automotive and truck.

At Eaton, we’re committed to “Doing Business Right.” And it’s much more than a slogan. It’s an unwavering commitment to the highest ethical practices and standards of behavior. It’s how we conduct ourselves in interactions with each other, our customers and our business partners. It’s how we support our communities and respect the environment. And it’s a reflection of our long-standing core values and beliefs about people. We’re actually calling it “Eaton is sustainable by design.

Senior Field Service Engineer
(Singapore, North, North East, North West, East, West, South West, Central)

Responsibilities:
  • Prepare field services jobs and interventions with the project managers
  • Write accurate professional reports acting as single point of contact between customers and company concerning technical issues and interfacing with all involved functions
  • Use company e-tools to retrieve technical documents and management of packing list, bill of material and drawings
  • Ensure all in-field activities are carried out safely complying with company Environmental Health & Safety (EHS) guidelines and procedures
  • Supervise the installation, calibration and set up of equipment
  • Lead and execute equipment start-up and performance tests
  • Responsible to keep reliability of customers’ assets and to support on proactive way all customers.
Requirements:
  • Min Diploma in Engineering or equivalent
  • Min of 5 years experience within the oil & gas industry, particularly in exploration & production and/or marine
  • Strong knowledge on hydraulics equipment an advantage
  • Ability to understand and implement mechanical drawings (section drawings; construction drawings; P&ID; etc)
  • English fluency both spoken and written
  • Availability to frequent travel on and off-shore
  • Strong analytic and problem solving skills together with good interpersonal & organizational skills
Please write-in or email with detailed resume, stating your current and expected salaries to:

Eaton Industries Pte Ltd
45 Tuas View Circuit, Singapore 637660

Email: hradmin@eaton.com


Job Vacancy: Senior Field Service Engineer at Eaton Industries Pte Ltd


At Eaton, our businesses make a difference to the world. And you can make a difference at Eaton.

Eaton is a global, Fortune 500 diversified power management company. And we have been doing business for nearly 100 years. Eaton helps customers manage power, so buildings, airplanes, trucks, cars, machinery and entire businesses can do more while consuming less energy. As an integrated global company, we are unified in our commitment to powering business worldwide.

Eaton products and solutions are critical to industries and businesses. Our technology delivers the power inside hundreds of products and places – from aircrafts and military jets, manufacturing plants and hospitals, airport terminals, data centers and homes to hybrid trucks, cars, theme parks and oil rigs, and even the Panama Canal. We serve customers in more than 150 countries and do business in five industries: electrical, hydraulics, aerospace, automotive and truck.

At Eaton, we’re committed to “Doing Business Right.” And it’s much more than a slogan. It’s an unwavering commitment to the highest ethical practices and standards of behavior. It’s how we conduct ourselves in interactions with each other, our customers and our business partners. It’s how we support our communities and respect the environment. And it’s a reflection of our long-standing core values and beliefs about people. We’re actually calling it “Eaton is sustainable by design.

Senior Project Engineer
(Singapore, North, North East, North West, East, West, South West, Central)

Responsibilities:
  • Support Project Manager in coordinating multi-discipline issues
  • Responsible for the efficient execution of assigned projects to deliver within schedule, cost, HSE and at an acceptable quality
  • Develop scope of work handed over by the client for each assigned project to achieve the specified deliverables
  • Review of cost and schedule estimates for assigned projects
  • Responsible for project reporting and client interface management
  • Maintenance and control project changes, utilizing the change management protocols
  • Early highlight and resolution of all project issues associated with assigned projects
Requirements:
  • Min Degree in Engineering
  • Min of 5 years experience within the oil & gas industry, particularly in exploration & production and/or marine Excellent command of both spoken and written English language is required
  • Excellent knowledge of Microsoft Office applications and necessary Project Management tools
  • Project Management certificate is preferred
  • Economics knowledge in project business establishing, monitoring procedures and financial control
  • Knowledge of Contract Law.
  • Good Conflict Management and Negotiations skills
  • Availability to travel on and off-shore
Please write-in or email with detailed resume, stating your current and expected salaries to:

Eaton Industries Pte Ltd
45 Tuas View Circuit, Singapore 637660

Email: hradmin@eaton.com


November 1, 2010

Job Vacancy: Senior Piping Engineer at JGC Singapore Pte Ltd


Due to our expansion regionally, JGC Singapore Pte Ltd, an established EPC contractor in the Oil & Gas / Petrochemical Industry, invites suitable candidates with relevant qualifications and experiences in to take on the challenges in a conducive and vibrant work environment.

Senior Piping Engineer
(Johor)

Responsibilities:
  • To generate/check/review Equipment Layout, Piping General Arrangement in PDMS/PDS/Auto CAD
  • To execute/review flexibility stress analysis if applicable
  • To produce/check piping ISOs in Auto CAD or extract piping ISOs including piping support from PDMS/PDS model
  • To execute/check the piping material take-off including all the piping and fittings, insulation, painting, piping, piping support etc
  • Co-ordinate with clients, Project Team, other discipline engineers, sub-contractors and vendors
  • provide leadership, technical support and mentoring service towards Engineer/Junior Engineer
Requirements:
  • Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Petroleum/Oil/Gas), Machenical, Chemical or equivalent.
  • Good knowledge of Equipment Layout, Piping General Arrangement in PDMS/PDS/Auto CAD
  • Experience in working as Piping Layout Lead Designer
  • Site exposure would be an advantage
  • Excellent coordination skill with Project Manager Team, Process, Stress, Instrument discipline etc
  • Knowledge of prevailing ASME, API, BS and NFPA codes
  • Required language(s): English
  • At least 5 year(s) of working experience in design of piping system in oil & gas, refinery, petrochemical industry.
  • Preferably Senior Executives specializing in Engineering - Oil/Gas or equivalent.
  • Job role in Supervisor/Team Lead or equivalent.
  • 2 Full-Time positions available.
  • Applicants should be Malaysian citizens or hold relevant residence status.
Interested candidates please apply online or send your resume to recruit@jsp.sg.

Expire Date: 12-11-10


 

Oil And Gas Jobs Copyright © 2010 LKart Theme is Designed by Lasantha